storageDrawers
,
~l%lW@’F@’?10Vf31(continued)
Half-WidthDrawers
1. Removefood from drawersand
drawercoversandshelf abovethem,
andtake shelf out.
2. Grip drawer and cover farthest
from the door simultaneously with
both hands,lift them off the front
supports, and pull them out.
3. (@end drawer and cover with
front side up.
3. Grip remaining drawer and
cover simultaneously with both
4. Turn drawer and cover to left and
remove from refrigerator. (With left-
hand door, turn drawer and cover
to right.)
Toreplace: reverse procedure,
making sure holes at rear of cover
mgage hooks on rear supports and
cover rests on supports at front of
refrigerator.
Seakxl SnackPack
(on models soequipped)
The Sealed Snack Pack–and glass
shelf to which it is attached-can
be relocated within the fresh food
compartment. The sealed drawer
retains high humidity for convenient
storage of unwrapped meatsand
cheese, bacon, hors d’oeuvres,
spreads and snacks.
hands, lift them off the front sup-
ports, and pull forward just enough
to detach from rear supports.
Detachable Meat Drawer
4. Tilt drawer and cover sideways.
\
5. Turn drawer and cover and take
them out.
To replace: reverse procedure,
making sure covers engage sup-
ports at rear and rest on supports
at front of refrigerator.
8
(on models so equipped]
The slide-out meat drawer can be _
removed and taken to the sink or
food preparation area.You may also
relocate it within the fresh food
compartment to suit your storage
needs.
To relocate meatdrawer:
If your meat drawer isattached to
anadjustable shelf, drawer and shelf
can be relocated at any level.
If your refrigerator hassteel wire
shelves, meat drawer can also be
relocated on anyshelf. Slide drawer
out, remove drawer cover from shelf
above, relocate cover on desired
shelf, and slide drawer back in place.
To Next Page
Loading...
Need help?
General
