Possible Causes What To Do
Temperature control • This is normal.
starts and stops motor
to maintain even
temperatures.
Front roller screws or
front leveling legs need
adjuring.
• See the Rollerssection.
Slight vibration is
normal
• Try moving dishes around
in refrigerator.
Temperature control
not set cold enough.
• See the About the controls
on the refrigerator section.
Warm weather or
frequent door openings.
• Set the temperature
control one step colder.
See the About the controls
on the refrigerator section.
Door left open.
• Check to see if package is
holding door open.
Door_fiopen.
• Check to see if package is
holding door open.
Too frequent or too
long door openings.
Frost within package is normal.
Automatic iceraaker
does_work
Automatic energy saver
system circulates warm
liquid around front edge
of freezer compartment.
Icemaker feeler arm in
the STOP(up) position.
0 This helps prevent
condensation on the
outside.
• Move the feeler arm to the
ON (down) position.
• Cubes may have fused to
the side of the mold.
Remove these cubes.
Water supply turned " See the Installing the
off or not eonnected, water line section.
Freezer compartment • Wait 24 hours for the
too warm. refrigerator to completely
cool down.
Piled up cubes in the
storage bin may cause
the icemaker to shut
off prematurely.
• Remove storage bin from
freezer and level cubes by
hand.
37
To Next Page
Loading...
Need help?
General
