To Next PageTo Next Page
Need help?Do you have a question about the GE UUY36ZGDAA and is the answer not in the manual?
General| Model | UUY36ZGDAA |
|---|---|
| Phase | 1 |
| Refrigerant | R-410A |
| Filter Type | Standard |
| Depth | 21 inches |
| Brand | GE |
| Heating Capacity | 36000 BTU |
| Voltage | 208/230V |
| Motor Type | Variable Speed ECM |
Follow all safety warnings and cautions to minimize risks of fire, electric shock, and personal injury.
Ensures proper grounding, disconnecting power before service, and using correct wiring for safety.
Avoid storing flammable materials near the appliance to prevent fire hazards.
Guidelines for safe handling of refrigerants, avoiding damage, and proper line sizing for R-410A systems.
Read instructions, understand codes, gather tools, and check skill level before starting installation.
Ensures matching air handlers with outdoor units and potential metering device adjustments for performance.
Installer responsibilities, manufacturer limitations, and technical support contact information.
Lists essential tools and consumables, including HVAC specific tools, for proper unit installation.
Provides physical dimensions and required clearances for air handler unit installation.
Identifies key internal parts and details model specifications like capacity, motor, and filters.
Product verification, pre-installation steps, and critical warnings for safe and correct installation.
Covers conventional line set flaring and refrigerant line installation, including brazing and evacuation.
Instructions for installing, testing, and configuring the condensate drain lines and traps.
Details electrical requirements, wiring connections, and safety precautions for duct system installation.
Procedure for installing optional heater kits and wiring connections for 8kW and 15kW units.
Guidance on reattaching and insulating the TXV sensing bulb for optimal performance.
Wiring diagrams for thermostat connections and indoor units (2/3 ton) with and without heaters.
Instructions for adjusting fan speed via dip switches and performance data for different models.
Checklist for final system tests, end-user operation explanation, and troubleshooting common issues.
Details warranty periods for parts, controllers, and compressors, and defines the 'Original Owner'.
Explains how to get service and lists conditions and damages not covered by the warranty.
Covers 10-year registered warranty terms, disclaimers, and product definition for warranty purposes.
