Need help?Do you have a question about the GE VersaMax IC200SET001 and is the answer not in the manual?
Emphasize hazardous voltages, currents, temperatures, or conditions causing personal injury.
Indicate where equipment might be damaged if care is not taken.
Call attention to information especially significant for understanding and operating equipment.
Steps to configure the VMSE over Ethernet, including IP address assignment.
Details on RJ45 and screw block serial ports, network interface, and MAC address.
Defines unique IP addresses for devices and port numbers for applications/channels.
Outlines steps to configure the VMSE via serial port or network using Telnet.
Procedure to assign a temporary IP address to the VMSE over the network.
Configuration screens and choices for SRTP/SNP, PassThru, and Modbus firmware.
Steps for downloading firmware to the VMSE via serial port or network host.
Details on RJ45, screw block connectors, and serial cable wiring diagrams.
Configuration for multidrop networks using VMSE with RS-422/485.
Details on CPU, memory, interfaces, power, temperature, LEDs, case, dimensions, and weight.
Explanation of IP address structure, classes, notation, network/broadcast addresses.
Explains netmasks and guidelines for private IP networks.
Table for converting decimal, binary, and hexadecimal values.
Statement of compliance with electromagnetic emissions, immunity, and safety standards.
General| Manufacturer | GE Fanuc |
|---|---|
| Series | VersaMax |
| Model | IC200SET001 |
| Type | Adapter |
| Compatibility | VersaMax PLC systems |
| Power Supply | 24V DC |
| Number of Slots | 1 |
| Communication Protocol | Ethernet |
To Next Page