GE VG2042 - Connecting VCR with Cable Box for Pay Channels; A;V Connection with Cable Box Setup

44
CONNECTIONS
TV With Audio/Video Jacks and Cable Box
to Unscramble Pay Channels Only
This connection assumes:
• You are using a cable box only to unscramble premium
channels.
• Your TV has audio/video input jacks.
This connection provides:
• Mono sound playback from VCR.
• Recording a scrambled or unscrambled channel through the
cable box while watching an unscrambled channel.
To use this connection, you must have:
• (3) antenna cables
• (2) audio/video cables
• (1) splitter
To connect:
1. Connect cables as shown.
2. Return to First Things Fir st , then follow the steps.
Using This Connection
Tune your TV to its video input channel.
To play a tape:
1. Insert a tape
2. If necessary, press PLAY.
To record a scrambled or unscrambled program and watch another
unscrambled:
1. Begin recording a scrambled program through the cable box
using one of the recording options.
2. Select an unscrambled channel on the TV.
TV
3 CH. 4
IN FROM
ANT.
VIDEO
OUT
AUDIO
OUT TO TV
VHF/UHF
IN 1
VCR
INPUT 1
VIDEO
R
L/MONO
S-VIDEO
AUDIO
OUTPUT
R
L
INPUT 2
VIDEO
R
L/MONO
CABLE/
ANTENNA
CABLE
CABLE BOX
SPLITTER
IN
OUT
All scrambled channels must be viewed
through the VCR.