– 19 –
Screws
Icemaker Drive
Motor Assembly
Screws
Screws
Wiring
Cover
Screws
Evaporator Fan Cover
To Remove the Evaporator Fan
1. Remove the ice bucket.
2. Disconnect the icemaker connector. Loosen 2
screws and remove icemaker.
3. Remove 4 screws and slide the icemaker drive
motor assembly forward. Disconnect the wiring
connector and remove the assembly.
5. Remove 2 screws and wiring cover.
6. Remove 6 screws and evaporator fan cover.
To Next Page
Loading...
