To Next PageTo Next Page
Need help?Do you have a question about the GEA FX14/1166 and is the answer not in the manual?
Explains warning symbols used in the manual: DANGER, WARNING, CAUTION, ATTENTION, INFO.
Details the required qualifications for personnel working on compressors to prevent accidents.
Provides general safety instructions for handling pressurised refrigerating compressors.
Highlights specific safety hazards and regulations when using Ammonia (NH3).
Lists the HFKW and HFCKW refrigerants suitable for the F series.
Instructions for correct positioning, mounting, and environment for the compressor.
Details on pipe connection types, diameters, and recommended tightening torques.
Best practices for routing suction and discharge piping.
Step-by-step guide for opening and closing compressor shut-off valves.
Information on V-belt drives and direct shaft coupling methods.
Mandatory checks and preparations required before compressor start-up.
Safety guidelines and procedures for performing pressure strength tests.
Instructions for conducting leak tests on the refrigeration circuit.
Steps for evacuating the refrigeration system and compressor.
Safe procedures for charging the system with the specified refrigerant.
Procedures and checks for safely starting the compressor for the first time.
Methods and design considerations to avoid liquid slugging.
Safety warnings and steps required before performing maintenance.
Overview of regular service and checking work for optimal operation.
Explains warning symbols used in the manual: DANGER, WARNING, CAUTION, ATTENTION, INFO.
Details the required qualifications for personnel working on compressors to prevent accidents.
Provides general safety instructions for handling pressurised refrigerating compressors.
Highlights specific safety hazards and regulations when using Ammonia (NH3).
Lists the HFKW and HFCKW refrigerants suitable for the F series.
Instructions for correct positioning, mounting, and environment for the compressor.
Details on pipe connection types, diameters, and recommended tightening torques.
Best practices for routing suction and discharge piping.
Step-by-step guide for opening and closing compressor shut-off valves.
Information on V-belt drives and direct shaft coupling methods.
Mandatory checks and preparations required before compressor start-up.
Safety guidelines and procedures for performing pressure strength tests.
Instructions for conducting leak tests on the refrigeration circuit.
Steps for evacuating the refrigeration system and compressor.
Safe procedures for charging the system with the specified refrigerant.
Procedures and checks for safely starting the compressor for the first time.
Methods and design considerations to avoid liquid slugging.
Safety warnings and steps required before performing maintenance.
Overview of regular service and checking work for optimal operation.
General| Category | Air Compressor |
|---|---|
| Model | FX14/1166 |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Pressure | 8 bar |
| Motor Power | 1.5 kW |
