To Next PageTo Next Page
Need help?Do you have a question about the GEAppliances GFE28HMH and is the answer not in the manual?
General| Brand | GE Appliances |
|---|---|
| Model | GFE28HMH |
| Category | Refrigerator |
| Type | French Door |
| Total Capacity | 27.8 cu. ft. |
| Refrigerator Capacity | 18.6 cu. ft. |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Energy Star Certified | Yes |
| Color | Stainless Steel |
| Width | 35.75 in. |
| Depth | 36.25 in |
Six-step process for safely servicing the appliance.
Required safety gear for GE Factory Service Employees during repairs.
Technical electrical ratings and values for various models.
Step-by-step guide for installing the water filter cartridge.
Guidance on when to replace and how to remove the water filter.
Information on ice production capacity and initial startup.
Steps to activate and deactivate the Dealer Demo Mode.
Steps to initiate sensor diagnostics for the autofill system.
Procedures to exit the sensor diagnostic mode.
Diagram showing component locations within the fresh food compartment.
Diagram showing component locations within the freezer compartment.
Identification of connectors on the main control board.
Identification of connectors on the door and dispenser boards.
Explanation of how refrigerant circulates through the system.
Diagram illustrating cooling operation when the 3-way valve is in Position A.
Diagram illustrating cooling operation when the 3-way valve is in Position B.
Details on the heated defrost cycle for both compartments.
Procedure for removing the fresh food defrost heater.
Procedure for removing the freezer defrost heater.
Procedure for replacing the freezer evaporator thermistor.
Steps to remove the inverter from the refrigerator.
Steps for replacing the refrigerator compressor.
Details on the 3-phase inverter compressor and its operation.
Information regarding single-speed compressors and how to verify operation.
Steps to remove components of the dispenser assembly.
Procedure for removing the icemaker from the fresh food door.
Steps for removing the freezer icemaker.
Description of the main control board's functions and installation.
Explanation of the door control board's functions and removal.
How to enter the service mode for diagnostic tests.
List of diagnostic tests for various boards.
List of diagnostic tests for thermistors.
List of diagnostic tests for motors, dampers, and heaters.
List of diagnostic tests for various fan components.
List of diagnostic tests for these system components.
How to enter service mode to view fault codes.
How error codes are displayed and interpreted.
Procedure to clear stored fault codes.
Definitions and causes for thermistor-related fault codes.
Fault codes related to fan motor operation and feedback.
Fault codes associated with defrost system operation.
Fault codes related to the sealed refrigeration system.
Fault codes indicating issues with the main control board.
Fault codes indicating problems with the door control board.
Fault codes related to hot water and icemaker functions.
Fault codes specific to icemaker operation and conditions.
Fault codes related to user interface and component interaction issues.
Additional fault codes for interaction issues.
Wiring diagram for cabinet components.
Wiring diagram for Cafe models' dispenser and door boards.
Wiring diagram for Profile models' dispenser and door boards.
Wiring diagram for GE/Adora models' dispenser and door boards.
Detailed terms and conditions of the GE Appliances warranty.
Exclusions from the GE Appliances warranty coverage.
