EasyManua.ls Logo

Gear4music COT-01A - User Manual

Gear4music COT-01A
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
If you have any more questions about this product, please do not hesitate to contact the
Gear4music Customer Service Team on: +44 (0) 330 365 4444 or info@gear4music.com
PRECAUTIONS
To avoid damage, do not apply excessive force to the
switches or controls.
For cleaning, wipe with a clean, dry cloth. Do not use
flammable liquid cleaners such as benzene or thinner.
CONTROLS AND FUNCTIONS
1. Power button (press and hold 2 seconds)
& Tuning modes switch
2. Battery Compartment
3. Clip
4. Display:
A. Note name
(for tuning modes of Chromatic/Guitar/ Bass/Violin/
Ukulele)
B. String number
(fortuning modes of Guitar/Bass/ Violin/Ukulele)
C. Tuning mode
D. Meter
SPECIFICATIONS
Tuning modes ........Chromatic, Guitar, Bass, Violin, Ukulele
Pitch range ..........440Hz
Detection range ......AO ( 27.5Hz )-C8 (4186.00Hz)
Tuning way ..........Clip ( tune by vibration)
Detection accuracy ...± 0.5 cent
Power supply .........one 2032 coin battery
Dimensions ..........48mmX73mmX28mm
Weight ..............23g
Included items .......Owners Manual, one 2032 coin battery
TUNING PROCEDURE
1. Press the power button and hold 2 seconds to turn on (off)
the tuner.
2. Press the power button continuousely to select tuning mode
out of Chromatic, Guitar, Bass, Violin and Ukulele.
3. Clip the tuner onto your instrument.
4. Play a single note on your instrument, the note name (and
string number) will appear in the display.
The screen colour will change. And the meter moves.
Backlight turns green; and meter stands in the middle: note
in tune
Backlight stays white; and meter points to left or right: flat or
sharp note
* In Chromatic mode, the display shows the note name.
* In Guitar, Bass, Violin and Ukulele mode, the display shows
the string number and the note name.
POWER SAVING FUNCTION
lf there is no signal inputs in 3 minutes after the power is on, the
tuner will turn off automatically.
INSTALLING THE BATTERY
Pressing on the cover as marked in the back of the product,
open the case, insert a CR2032 coin battery being careful to
observe the correct polarity. Battery life may differ according
to the conditions of use. If the unit malfunctions, and turning
the power OFF and then ON does not resolve the problem,
please remove and wait for 5 minutes to reinstall the battery.
Battery attached is only for testing. Please change to a new high
standard battery when necessary.
COT-01A HEADSTOCK CLIP-ON
CHROMATIC TUNER USER MANUAL
1
3
4
C
B
A
D
2
MADE IN CHINA
Question and Answer IconNeed help?

Do you have a question about the Gear4music COT-01A and is the answer not in the manual?

Summary

Precautions

Controls and Functions

Power Button and Tuning Modes Switch

Controls device power and allows selection of tuning modes.

Battery Compartment

Houses the power source for the tuner.

Clip Mechanism

Secures the tuner to the instrument's headstock.

Display Components

Shows note name, string number, tuning mode, and meter.

Tuning Procedure

Power Saving Function

Specifications

Installing the Battery

Gear4music COT-01A Specifications

General IconGeneral
ModelCOT-01A
CategoryTuner
TypeClip-On Tuner
DisplayLCD
Tuning RangeA0 (27.5Hz) - C8 (4186Hz)
Tuning ModesChromatic
A4 Calibration430-450Hz
Accuracy+/- 1 cent
Power SourceCR2032 Battery (Included)