What to do if my Gear4music DP-50 keyboard produces no sound, but the lights and screen work?
If no sound is produced by the keyboard of your Gear4music Musical Instrument, but the lights and screen work, check that the master volume control is not set to minimum and that nothing is plugged into the headphone socket.
What to do if the Gear4music DP-50 Musical Instrument volume is too soft, sound quality is poor, rhythm stops unexpectedly, recorded data of the song does not play correctly, or LCD display goes dark?
If the volume is too soft, the sound quality is poor, the rhythm stops unexpectedly, recorded song data doesn't play correctly, or the LCD display suddenly goes dark and resets, it could be due to an incorrect or insufficiently rated DC mains adapter. If you have lost or damaged your DC adapter, please contact your nearest store for a correct replacement adapter.
Why does my Gear4music DP-50 Musical Instrument make noise when using a mobile phone?
When using a mobile phone in close proximity to the Gear4music Musical Instrument, interference may occur. To prevent this, either turn off your mobile phone or use it further away from the instrument.
What to do if the sustain pedal or footswitch produces the opposite effect on my Gear4music DP-50 Musical Instrument?
If the sustain pedal or footswitch seems to produce the opposite effect on your Gear4music Musical Instrument, it's likely that the polarity of the footswitch needs to be correctly detected. Make sure the jack plug for the footswitch is connected. Switch the instrument on whilst not touching the pedal.
Why does the Auto Accompaniment on my Gear4music Musical Instrument not sound properly?
The Auto Accompaniment may not sound properly if the Auto Accomp Volume Function is not set to an appropriate level or if the Split Point is not set to an appropriate key for the chords you are playing. Set the Split Point to an appropriate position on the keyboard.
Why does the sound of the voice change from note to note on my Gear4music Musical Instrument?
This is normal. The digital tone generation uses multiple recordings (samples) of an instrument across the range of the keyboard.
Why does my Gear4music DP-50 Musical Instrument make a popping sound when turned on or off?
This is normal and indicates that the instrument is receiving electrical power.
What to do if not all of the voices seem to sound, or the sound seems to cut off on my Gear4music DP-50?
If not all voices seem to sound, or the sound seems to cut off on your Gear4music Musical Instrument, it's because the instrument is polyphonic up to a maximum of 64 notes. Notes exceeding this limit will not sound.
Why does my Gear4music DP-50 power off after not touching the keys?
This is normal, and the Auto Power Off function may have been activated. If you need to disable the Auto Power Off function, please see how to do this in the owner's manual.
A list of essential safety guidelines to follow for proper use and to prevent hazards.
Description of the buttons, displays, and knobs on the top panel of the piano.
Identification and explanation of the connectors and jacks found on the rear panel.
Steps to follow for assembling the piano and connecting power.
How to power the piano on/off and adjust the master volume level.
Explanation of the function and use of the damper pedal (right pedal).
Explanation of the sostenuto (center) and soft (left) pedal operations.
How to reset the piano's voices and settings to their factory default state.
Explanation of headphone jacks, MIDI OUT port, and Line OUT audio output.
Guide to USB connectivity for MIDI/Audio and connecting external sound sources.
General| Brand | Gear4music |
|---|---|
| Model | DP-50 |
| Category | Musical Instrument |
| Language | English |
To Next Page
