VII. Model Information
-8-
Replacement parts as well as custom
made hoses in lengths up to 100 feet
can be ordered directly through
Dropmaster.
An optional hitch mounted carrier for
the Dropmaster DM12 is also
available. The carrier works with any
standard 2” receiver and features a set
of fold down ramps for easy loading
and transportation of your
Dropmaster.
Dropmaster by Gecco Inc. is the
industry leader in innovative, time
saving tools. Please check our website,
www.Dropmaster.co, for information
on our other products.
Dropmaster DM12
Features
• Deisgned and built for 24/7 operation, all of
the Dropmaster’s components are rated for
continuous duty.
• Powered by a ¾ hp, high torque, low amp
motor.
• 1/3 hp discharge pump – capable of pumping
38gpm.
• Factory set, fail safe vacuum relief valve –
maintains 10” Hg vacuum.
• 10” Pneumatic tires – easily rolls over most job
site obstacles.
• 1” Suction and discharge hoses – allows set up
virtually anywhere.
• Supplied with a 20’ GFI protected 12 gauge
power cord.
• Factory tested and approved for Uponor Pex
type a.
• Can be used on all types of process piping
including PVC and CPVC.
• Safe for use with most antifreeze solutions.
• Removes contaminants and debris from
refrigeration lines.
• Can be used on a variety of closed loop piping
systems.
To Next Page
Loading...