EasyManua.ls Logo

GeChic On-Lap 2501 Series - User Manual

GeChic On-Lap 2501 Series
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Manual of 2501 Series
2501 シリー ユーザーガイド
Read Me Before First Usage
ご使用前にお読みください
2501

Questions and Answers

  • M
    Melissa MclaughlinAug 11, 2025
    How to fix a GeChic On-Lap 2501 with no image?
    • J
      Jackie NicholsAug 11, 2025
      If your GeChic Monitor is not displaying an image, there might be a connection issue with the video cables. Ensure that one end of the HDMI or VGA cable is securely plugged into the video input port of your On-Lap Monitor, and the other end is connected to the video output port of your laptop or smartphone. Also, try adjusting the brightness and contrast settings on your monitor, or reset them to the factory default settings via the OSD (On-Screen Display) menu.
  • S
    Stephanie NelsonAug 17, 2025
    What to do if my GeChic On-Lap 2501 says 'No Signal'?
    • T
      Teresa WilliamsAug 17, 2025
      If your GeChic Monitor OSD shows a 'No Signal' warning, double-check that the video cable is properly connected. Ensure the cable is securely plugged into both the video input port on your On-Lap Monitor and the video output port on your laptop.
  • S
    Steven AguilarAug 22, 2025
    Why is there no audio output from my GeChic On-Lap 2501 Monitor?
    • N
      Nathan SantanaAug 23, 2025
      If there is no audio output from your GeChic Monitor, first check if the Mute Button is activated. Touch the hot key to increase the volume.
  • S
    Shannon PhillipsAug 28, 2025
    What to do if GeChic Monitor hot keys are not working?
    • S
      sarah82Aug 28, 2025
      If the hot keys on your GeChic Monitor are not responding, check the following: 1. Ensure the power LED green light is on. 2. Verify that the Hot Key Lock Button is not activated. 3. Make sure you are using your fingertip to touch the center of the buttons.
  • A
    Andrew ShepherdSep 3, 2025
    Why is the OSD not responding on my GeChic On-Lap 2501?
    • A
      Ann CampbellSep 3, 2025
      If the OSD (On-Screen Display) on your GeChic Monitor is not responding, follow these steps: 1. Plug in the USB Power Cable first. 2. Then, plug in the HDMI Video Cable. 3. Use your fingertip to touch the center of the OSD button. Plugging the HDMI Video Cable before the Micro USB Power Cable may cause the OSD to not boot or become unresponsive.

GeChic On-Lap 2501 Series Specifications

General IconGeneral
Screen Size15.6 inches
Panel TypeIPS
Aspect Ratio16:9
Brightness250 cd/m²
ConnectivityHDMI, USB-C
Built-in SpeakersYes
TouchscreenNo
Foldable StandYes
Resolution1920 x 1080
Power SourceUSB