Water to use:
Demineralized water is perfect if it is specially produced for steam
devices.
Distilled water should be avoided. Its degree of acidity is harmful to
metals and gaskets in your appliance. It should be mixed with non-acidic
water.
This device is designed to operate with tap water. If you use hard water,
schedule regular rinsing according to the intensity of your use. Too much
lime deposit can stain clothes and cause your steamer to malfunction.
Getting started: The appliance is correctly assembled, the steam diffuser
is in its location, the tank contains water and placed on the base, the socket
is connected to a suitable electrical circuit.
Turn the start button and select the desired power according to the nature
of the fabrics to be worked.
Shake the diffuser head lightly to remove water residue.
The boiler heats up quickly and the steam comes out in a continuous flow.
Warning: This appliance is designed to work vertically. The steam diffuser
hose should never be bent or drop lower than its attachment point on the
base. If the diffuser head is too low, hot water may flow out.
Operation: The available steam time depends on the selected steam flow.
When the flow of steam stops, turn off the appliance and fill the tank. A
heating time without water is not recommended.
The device is equipped with a thermal protection fuse in the event of
overheating for the protection of people and the device, replacement
of which is not covered by the warranty.
To Next Page
Loading...