Portable Washing Machine GPW-6
E&OE ©2017 Gecko 6
3. Transfer the clothes from the wash tub to the spin tub. Place the basket cover on top of the clothes and
press it down so it clips under the top edges of the spin tub.
4. Close the spin tub secondary cover and the wash and spin tub covers.
5. Connect one end of the water inlet hose to a suitable water source and the
other end the spin tub water inlet connection (right side).
6. Rotate (to the right/clockwise) the Spin Timer to the desired time setting –
the spin tub starts rotating.
7. Turn on the water supply for 20 to 30 seconds for a secondary rinse, then
turn the water supply off.
8. When the cycle has finished, drain the water.
Repeat the above processes, if necessary.
Lint Filter
The appliance features a filter to catch fabric lint and other small objects during the wash. The filter helps
keep washed clothes looking better and aids in preventing blockages in the appliance. Clean the lint filter
regularly. To clean the lint filter:
1. Ensure the appliance is disconnected from the electrical supply.
2. Open the wash tub cover.
3. Slide the lint filter up and out of the tub.
4. Remove any "fluff" etc from the filter netting, then rinse.
5. Re-install the lint filter.
To Next Page
Loading...
General