Need help?Do you have a question about the Gecko SSPA-1 and is the answer not in the manual?
General| Brand | Gecko |
|---|---|
| Model | SSPA-1 |
| Category | Water Pump |
| Language | English |
Overview of the TSC-35 keypad model for SSPA-MP systems.
Overview of the TSC-19 keypad model for SSPA systems.
Overview of the TSC-18 keypad model for SSPA systems.
Overview of the TSC-9 keypad model for SSPA systems.
Troubleshooting steps for GFCI trips in 120 VAC spa systems.
Troubleshooting steps for GFCI trips in 240 VAC spa systems.
Configuration of Jumper 1 for current limiting settings.
Configuration of Jumper 2 for temperature unit display (Fahrenheit/Celsius).
Configuration of Jumper 3 for single or dual pump systems.
Steps to address display flashing when weather is very hot.
Steps to address display flashing when hot weather is not a factor.
Procedure to adjust filter cycle duration settings.
Troubleshooting checks for 240 VAC systems when nothing works.
Troubleshooting checks for 120 VAC systems when nothing works.
Power supply checks for 240 VAC systems when nothing works.
Power supply checks for 120 VAC systems when nothing works.
Steps to take when the heater indicator does not light up.
Steps to take when the heater indicator lights up but spa isn't heating.
Procedure to adjust the pressure switch using a voltmeter.
Procedure to adjust the pressure switch without a voltmeter.
To Next Page
