Geekworm official store https://geekworm.aliexpress.com
WIKI:http://www.raspberrypiwiki.com/index.php/EXP_GDC 14 / 18
4] integrated graphics notebook could automatically switch to the external screen display, please
pay attention to connect the external display, an external monitor is connected with the output end is
connected with the graphics on the outside.
2, After the start of the notebook repeatedly restart
1] notebook upgrade to the latest version of BIOS
2] use of sleep to boot
3, Atart the newspaper 1802 or 1804 error,
1] brush notebook BIOS white list
2] in BIOS to turn off external graphics card used in the port, the corresponding port opened in DIY
EGPU.
4, Start the PXE error
1) shut down in the notebook BIOS off the network boot option "BOOT TO LAN"
5, The card in the startup LOGO
1] some of the motherboard may not support more than 4G of memory, please put down to a single
memory memory below 4G;
2] the use of sleep to boot
3] in the notebook BIOS off network boot option "BOOT TO LAN"
4] switching in BIOS "Video device 'or" Graphic mode "options, Integrated or UMA to set explicit
modes, switchable switching mode, THINKPAD model in PCI EXPRESS PCI-E graphics mode
6, Enter the system blue screen
1] but the add in graphics card into the system uninstall drive with built-in alone, and disable the
built-in alone in Device Manager
2] in BIOS to turn off the wireless network card. (this is only for GM45 before platform notebook)
3] we recommend replacing the operating system.
7, In the WINDOWS picture card
1] but the add in graphics card into the system uninstall drive with built-in alone, and disable the
built-in alone in Device Manager
2] we recommend replacing the operating system.
8, Enter the system seriously slow, slow response
1] notebook upgrade to the latest version of BIOS
2] used a single memory
3] to unload and disable the notebook comes with video
4] check hardware wiring is correct. Using second-hand graphics card please note wipe graphics
gold nail
To Next Page
Loading...