Need help?Do you have a question about the Geekworm X825 and is the answer not in the manual?
General| Brand | Geekworm |
|---|---|
| Model | X825 |
| Category | Computer Hardware |
| Language | English |
Supports 2.5-inch SATA HDD/SSD up to 4TB, ideal for Raspberry Pi 4.
Features UASP support, USB 3.1 Gen1 SATA bridge, and shorter USB 3 connector.
Includes test pins for power, drive status indicator, and specific case compatibility.
Details the PCB dimensions for the X825 V2.0 board.
Supports 2.5 inch SATA HDD/SSD up to 9.5MM thickness.
Supports installing X735 power management board for external power switch.
Does not support X708 UPS with battery holder installation.
Links to external papers and tutorials on USB boot and storage setup.
System crashes with USB Boot may be resolved by formatting HDD/SSD.
Poor power supply quality can prevent HDD/SSD detection.
Details power sources for X825 V2.0 with/without X735/X708.
Information on USB boot support is available in a linked document.
Large data transfer recognition issues may be firmware related.
The DC 5V port has internal +5V and external GND polarity.
USB 3.0 can interfere with 2.4GHz Wi-Fi; use 5GHz or wired connection.
To Next Page
