Gefen EXT-CU-LAN Setup Guide

• For the Cisco SG300 or SG500X series switches:
1. Login to the switch with a Web browser.
2. Go to “Admin” > “Port Management” > “Port Settings”.
3. Select “Enable Jumbo Frames”.
4. Click “Apply” to save the setting.
5. Go to “Multicast” > “Properties”.
6. Enable “Bridge Multicast ltering”.
7. Click “Apply” to save the setting.
8. Go to “Multicast” > “IGMP Snooping”.
9. Enable “IGMP Snooping”.
10. Click “Apply” to save the setting.
Setup Guide Setup Guide
page | x
Before You Begin

Gefen EXT-CU-LAN Specifications

General

Brand	Gefen
Model	EXT-CU-LAN
Category	Controller
Language	English