Gehl HL 360 User Manual

HL360
PRE-DELIVERY
CHECK LIST
DELIVERY
CHECK LIST
The following Check List is an important reminder of
valuable information and inspections which MUST be
made before delivering the unit to the Customer. Check
off eaGh item after prescri bed action is taken.
Check that :
__ Unit is NOT damaged in shipment. Check for such
things as dents and loose or missing parts; correct
or replace components as required .
__ Fuel Tank, Fuel Lines and Fittings are NOT
damaged, leaking or loosely secured .
__ Battery is securely mounted and NOT cracked.
Also check that Cable connections are tight. Also
check Electrolyte level and strength (in domestic
shipment, Battery is filled at the factory).
__ Lift and Tilt Cylinders are NOT damaged, leaking
or loosely attached.
__ Hydraulic Pump and Motor are NOT damaged,
leaking or loosely attached.
__ Hydraulic Hoses and Fittings are NOT damaged,
leaking or loosely attached.
__ Oil Filter is NOT damaged, leaking or loosely
attached .
__ Wheels are securely attached and Tires are properly
inflated.
__ Entire Loader is properly lubricated and that
Hydraulic System, Engine Crankcase and Hydro-
static Transmission are filled to the proper oil
levels.
__ All Guards, Shields and Decals are in place and
properly attached.
__ Serial number for the unit is recorded in the spaces
provided on this page and page 3.
Start the Loader engine and test-run the unit while
checking that proper operation
is exhibited by all
controls.
Check that :
__ Traction T-bar and Lift /Tilt T-bar operate
properly and are NOT damaged or binding .
I
acknowledge that pre-delivery service was performed
on this unit as outlined above.
Dealer's Name
By ____________ __ ____ _
Dealer's
Set-up Man's Signature
Date Set-up __ ______________________ ____ _
Serial N umber ___ __________________________ _
The following Check List is an important reminder of
valuable information that MUST be passed on to the
Customer at the time the unit is delivered. Check off each
item as you explain it to the Customer.
_ Give the Customer his Operator's Manual. Instruct
him to be sure to read and completely understand its
contents BEFORE attempting to operate the unit.
_
Explain and review with him the WARNING section
of this Manual.
_ Explain and review with him the Controls & Safety
Equipment section of this Manual.
_ Explain that regular lubrication is required for con-
tinued proper operation and long life. Review with
him the Lubrication section of this manual.
_ Explain and review with him the Service section of
this manual.
_ Explain the importance of his thorough understand-
ing of and familiarity with the Loader Controls
BEFORE attempting to operate the Loader.
- Explain that he MUST consult the Engine
Operator's Manual (provided) for related specifica-
tions,
operation and maintenance instructions.
_ Complete Owner's Registration Card.
I acknowledge that above points were reviewed with me
at the time of delivery.
Customer's Signature
Date Delivered _____ _______ ______ ______ _
(Note: Pages 5 and 6 Have Been Removed at
Perforation)
7

Gehl HL 360 Specifications

General

Brand	Gehl
Model	HL 360
Category	Front End Loaders
Language	English