GEIGER GF0021 User Manual

1: GF0021/-27 Display LCD:
Display
time or text
menu
Display
weekday
Display time shift
Display
„Auto“ (automati
c) or
„Hand“(manual)
Display holiday
function
Display direction
(UP /DOWN)
Display code
selection
4: GF0021/-27 Menu setup:
In programming mode there is a total of seven menu items. Use
UP/DOWN keys to select options.
Au:Hd (automatic/manual)
Code
Grun
(reset)
Urlb (holiday)
Astr
(astro function)
Prog
(programming)
A-SZ (programming of
switching times)
7: Prog (Programming field):
Submenu with 4 options:
PrSZ = Programming of the
switching times
Zeit = Programming of the time
datu = Programming of the date
Lern = Learning of radio codes
PrSZ= Programming of
the switching times
Zeit = Programming of the time
Datu = Programming of the date
Lern= Code learning and
programming
Hand = Enter code
manually
Auto = Code learning from
transmitter
2: GF0021/-27 Operating keys:
PROG key
UP key DOWN key
Display
To facilate and ease the
programming of the device the
upper section can be removed.
5: Au:Hd (Change-over from manual to automatic
mode):
The current operating
mode is shown on
display
(AU / HA)
Actuate key PROG to
change over from one
mode to the other
Automatic mode
Manual mode
Briefly
displayed
Briefly
displayed
8: PrSZ (Programming switching time / weekday
Select one day or
The whole week with
Confirm
3: GF0021/-27 Operating keys:
! Actuate the key PROG to change over to the programming mode
! Select menu items with the UP/DOWN keys
! Confirm with the key PROG.
! Actuate the UP/DOWN keys simultaneously to cancel all settings that have
not been confirmed and exit the programming mode.
! If no key is actuated, all previously made changes are cancelled after the
expiry of a 40 second time and the clock returns to normal mode.
6: A-SZ (Programming of the switching times)
Switching time 2
displayed
Activate/deactivate
switching time
Switching time off
Month
Next day
Ready
9: PrSZ (Programming of 4 switching times):
1
st
digit of
the hour
flashes
2
nd
digit of
the hour
flashes
1
st
digit of
the minutes
flashes
2
nd
digit of
the minutes
flashes
Switching
channel 1- 4
flashes
Direction
flashes
Astro
function
flashes
Go on
or
Ready
Or wait 40 seconds
Next switching
time
Programming

GEIGER GF0021 Specifications

General

Brand	GEIGER
Model	GF0021
Category	Transmitter
Language	English

Summary

GF0021/-27 Display LCD

GF0021/-27 Operating Keys and Display Elements

Display Elements

Describes the display of weekday, automatic/manual mode, time shift, code selection, direction, and holiday function.

Operating Keys

Details the PROG, UP, and DOWN keys for navigation and mode changes.

GF0021/-27 Programming Mode Operations

Entering Programming Mode

Actuate the PROG key to enter the programming mode.

Navigating Menu Items

Use UP/DOWN keys to select menu items.

Confirming Settings

Confirm selections by pressing the PROG key.

Cancelling Programming

Simultaneously press UP/DOWN keys to cancel and exit.

Automatic Cancellation

Settings are cancelled if no key is pressed for 40 seconds.

GF0021/-27 Menu Setup Options

Automatic/Manual Mode (Au:Hd)

Select between automatic and manual operating modes.

Switching Times Programming (A-SZ)

Configure the programmed switching times.

Holiday Function (Urlb)

Activate or deactivate the holiday function.

General Programming (Prog)

Access the main programming functions.

Reset Function (Grun)

Reset device settings to factory defaults.

Astro Function (Astr)

Configure settings related to the astro function.

Code Function (Code)

Manage device codes and learning.

Automatic/Manual Mode Switching

Displaying Current Mode

The current operating mode (AU/HA) is displayed.

Switching Modes

Use the PROG key to switch between automatic and manual modes.

Automatic Mode Operation

Description of the automatic mode.

Manual Mode Operation

Description of the manual mode.

Programming Switching Times (A-SZ)

Activate/Deactivate Switching Time

Enable or disable programmed switching times.

Setting Switching Time Off

Configure the time when switching is deactivated.

Setting Switching Time 2

Configure a second switching time.

Month Selection

Select the month for specific time settings.

Next Day Setting

Configure settings for the next day.

Ready State

Indicates the system is ready after setting.

Programming Field (Prog)

Submenu Options

Access submenus for switching times, time, date, and code learning.

Programming Switching Times (PrSZ)

Configure the programmed switching times.

Programming Time (Zeit)

Set the current time.

Programming Date (Datu)

Set the current date.

Radio Code Learning (Lern)

Learn radio codes from a transmitter.

Manual Code Entry (Hand)

Enter codes manually.

Transmitter Code Learning (Auto)

Automatic code learning from the transmitter.

Switching Time and Weekday Programming (PrSZ)

Day Selection

Select a single day or the entire week for programming.

Confirming Settings

Confirm the programmed settings.

Programming 4 Switching Times (PrSZ)

Programming Interface

Overview of the programming interface for switching times.

Hour Digit Flashing

Indicates which hour digit is being programmed.

Minute Digit Flashing

Indicates which minute digit is being programmed.

Switching Channel Selection

Select the switching channel from 1 to 4.

Direction Flashes

Visual indicator for direction changes.

Astro Function Flashes

Visual indicator for astro function settings.

Ready/Go On State

Indicates the device is ready or active.

Setting the Time (Zeit)

Setting the Hour

Adjust the hour setting.

Setting the Minute

Adjust the minute setting.

Setting Switching Time

Configure the programmed switching time.

Ready State

Indicates the device is ready after time setting.

Setting the Date (datu)

Setting the Day

Adjust the day setting.

Setting the Month

Adjust the month setting.

Setting the Year

Adjust the year setting.

Setting Switching Time

Configure the programmed switching time.

Ready State

Indicates the device is ready after date setting.

Learning and Programming Codes (Lern)

Sending Command

Send a command for code learning or programming.

Waiting Period

Wait 10 seconds for command processing.

Switching Channel

Select the switching channel for code operations.

Ready State

Indicates readiness after code operations.

Time Shift Adjustment (Astr)

Changing Minute Digit

Adjust the minute digit for time shift.

Changing Direction

Modify the direction setting.

Repeating Operation

Repeat the current operation.

Ready State

Indicates readiness after time shift adjustment.

Latitude Degree Setting (Astr)

Initiating Change

Start the process to change the latitude degree.

Ready State

Indicates readiness after setting the latitude degree.

Programmable Latitude Values

List of values that can be programmed for latitude.

Astr Latitude/Town Settings

Basic Settings Reset (Grun)

Deleting All Settings

All settings are deleted during reset.

Returning to Initial Setting

Time and date must be reset after returning to initial settings.

Pressing for Reset

Press the button for at least 3 seconds to initiate reset.

Holiday Function (Urlb)

Activating Holiday Function

Turn on the holiday function.

Deactivating Holiday Function

Turn off the holiday function.