To Next PageTo Next Page
Need help?Do you have a question about the GekkoScience NewPac BM1387 and is the answer not in the manual?
General| Model | NewPac BM1387 |
|---|---|
| Manufacturer | GekkoScience |
| Hash Algorithm | SHA-256 |
| Interface | USB |
| Chip | BM1387 |
Provides a brief overview of the NewPac BM1387 miner's features, including ASIC chips and voltage range.
Details necessary accessories, emphasizing a powered USB hub with adequate amperage per port.
Outlines the correct sequence for connecting the USB hub to the computer and the miner to the hub.
Guides on downloading cgminer, Zadig driver, and installing WinUSB for Windows operation.
Details on executing cgminer with specific commands, parameters, and the AsicBoost option.
Provides compilation steps for cgminer on Ubuntu 16.04 LTS, including necessary packages and commands.
Details cgminer installation for Debian 8.7.1 or Raspbian, listing required libraries and build commands.
Addresses common problems like cooling, driver access errors, and frequency setting for optimal performance.
Guides on obtaining the latest driver and cgminer code versions by pulling updates and rebuilding.
Presents a table showing rough guides for power and current draw at various operational frequencies.
Warns that adjusting voltage for overclocking is for advanced users only and may void the warranty.
Directs users to the official GekkoScience NewPac Support Thread for questions and troubleshooting assistance.
