SELECT
assign a user scale to a pad Page4
release notes Genesys series
ASSIGN AN USER SCALE TO A PROGRAMMABLE PAD
This function allows you to assign to any of the programmable pads, a custom temperament or user
scale that is memorized in any of the User scale memory locations.
Concept:
A Create or modify one (or more) USER SCALE
Steps:
Your custom scale pitch data is now memorized in
the USER1 location. You can memorize other user
scale using the remaining locations (from 2 to 8)
Description
B Assign the USER SCALE to a Programmable Pad
CREATE AN USER SCALE
3
Select KEYBOARD SCALE in the menu with the
DOWN CURSOR, then select USER1 by rotating
the DIAL
2
Press the TUNING & SCALE [F5] function button
1
Press the SYSTEM button on the panel
7
Select a USER scale to memorize your custom
scale (USER1 in this case) , then press ENTER
6
Once you have fi nished detuning the notes,
press the SAVE button [F8]
4
Select the note you want to detune using the
CURSOR, then input the new value by rotating
the DIAL (i.e. D#-1 in this example)
5
Repeat the detune operation selecting other
notes as desired
To Next Page
Loading...
Need help?
General
