Need help?Do you have a question about the Gema OptiFlow IG07 and is the answer not in the manual?
General| Flow Range | 0.1 to 20 L/min |
|---|---|
| Pressure Range | 0 to 10 bar |
| Accuracy | ±1% of reading |
| Precision | ±0.5% of full scale |
| Material | Stainless steel and high-grade plastics |
| Power Supply | 24 V DC |
| Communication | RS-485, Modbus RTU |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 70°C |
| Weight | 1.5 kg |
General safety guidelines, conforming to technical regulations for powder coating applications.
Regulations specific to the product as part of the system's safety concept.
Describes typical characteristics, the overall view, and the operational principle of the injector.
Guidance on setting powder volume, reference values for output, and guide values for OptiStar.
Step-by-step procedure for cleaning the injector, including component dismantling and air cleaning.
To Next Page