Need help?Do you have a question about the Gemas Pool Control Mono and is the answer not in the manual?
General| Power Supply | 230 VAC |
|---|---|
| Power Consumption | 10 W |
| Protection Degree | IP65 |
| Operating Temperature | -10°C to +50°C |
| Weight | 1.2 kg |
| Communication | RS485 |
| Number of Outputs | 1 |
| Output Type | Relay |
| Type | Pool controller |
Configure start and closing times for pump, lights, and auxiliary equipment.
Set the desired start time for equipment operation.
Set the desired closing time for equipment operation.
Manually turn connected equipment on or off.
Monitor pump current and protect against over/under tolerance.
Switch between automatic and manual modes for pump and groups.
Adjust the system clock or time settings.
To Next Page