Need help?Do you have a question about the Gemas RANGER and is the answer not in the manual?
General| Protection | IP55 |
|---|---|
| Insulation class | F |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Dimensions | Varies by model |
Explains the LED display, buttons (SET, 1/▼, 2/OK, 3/▲, 0), power light, and error light.
Configures the pump controller for constant power or constant speed operation using the SET button.
Adjusts the pump's operating speed in constant speed mode via the controller buttons.
Configures the pump's power or flow percentage in constant power mode.
Program the pump's priming speed and duration for optimal startup.
Details the procedure to stop the pump and the conditions under which it operates.
Explains how to manually start the pump and select operating modes.
Restores the pump controller to its original factory default settings.
Describes how the pump controller display turns off to save power.
Explains the operation of the error light and LED display during fault conditions.
To Next Page