EasyManua.ls Logo

gemini pro GSO20 - Operating Environment, Maintenance, and Power Matters; Operating Environment Conditions; Maintenance and Power Safety

gemini pro GSO20
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating environment matters
1. Do not use the product in the following environments:
- humid or close to water environment;
- directly exposed to the sun or close to the heat source or high-temperature environment, such as near
the gas stove;
- on an unstable surface;
- near inflammable materials or heat-resistant materials (such as tablecloths, curtains and towels).
2. Do not let children use, clean, repair and maintain this product alone without supervision and
guidance. Put this product and its power cord out of the reach of children. Touchable parts may become
hot during use. Young children should stay away.
3. Do not block the exhaust port, otherwise it may cause a fire. The product must be cleaned regularly to
prevent the exhaust port from being blocked by foreign matters and dust.
4. This product can only be used by individuals or families, and is not suitable for commercial purposes.
Maintenance matters
1. Do not modify the product without authorization or use the original parts provided by non
manufacturers for repair, otherwise it may cause danger and the maintenance will be invalid.
2. Always check the products, power lines and plugs. In case of damage, in order to avoid danger, stop
using them immediately, and contact the after-sales service center Co., Ltd. to arrange inspection and
maintenance.
Power matters
1. When inserting or unplugging the plug, hold the plug firmly with your hand, and do not grasp the
power cord.
2. Do not put heavy objects on the power line, clamp, modify, pull or twist the power line.
3. Make sure that the power line of this product is not close to the furnace body, otherwise the
insulation material of the power line may melt and there is a risk of short circuit.
4. Do not use or hang the power cord on the edge of the table or cabinet when the power cord is
entangled, or let it contact the hot surface, otherwise it will damage the power cord.