12. Scale may be formed in the furnace due to water circulation during steam production, or the product
may not work. Therefore, it is recommended to descale at least once a month and follow the following
procedures:
① Use bottled 100% pure lemon juice or freshly squeezed lemon juice without any pulp ingredients. If
you are not sure that there is no pulp, filter it with a filter.
② Add 50 ml of filtered lemon juice to 1000 ml of water. Stir well and pour into the water tank.
③ Put the water tank back to the bottom of the furnace correctly and push it firmly into place.
④ Clean according to steps ④ to ⑧ of the descaling procedure.
⑤ After the procedure is completed, remove and empty the water tank, clean it and refill it. Clean
according to steps ④ to ⑧ of the descaling procedure.
⑥ When the cleaning is finished and the product is cooled, remove and empty the water tank and wipe
the furnace chamber dry.
13. After use, empty and clean the water tank and drain pan, and wipe them dry with a soft cloth.
14. Regularly clean the sealant edge of the furnace door with a slightly wet soft cloth.
15.Do not wet the control panel. If the control panel is wet, wipe it dry with a soft cloth. Before cleaning
the control panel, unplug the power plug to avoid wrong setting or accidental operation. Never use
detergent, abrasive or spray cleaner to clean the control panel.
Product description
Product structure:
(The product image is only for illustrative purposes and may be different from the actual product.)
1. Exhaust port: used to discharge the water vapor in the furnace chamber.
2. Furnace door handle: used to open and close the furnace door.
3. Control panel: it is used to operate the steam oven. Please refer to the "control panel guide" for
details.
4. Water tank inlet: put it into the water tank.
To Next Page
Loading...