10
ARMING STAY: PROTECTING YOURSELF AT HOME
Instant Protection
When retiring for the evening, after all family members are home, you can cancel the entry
delay on the Entry Zone(s). Then, when armed, opening the entry door will cause an
immediate alarm. (When arming, exit delay will remain in effect).
1. To cancel the entry delay while on the premises, press and hold down
P for 2 seconds after arming.
2. When armed, the window will display “SYSTEM ARMED” and the red ARMED light will flicker rapidly to indicate instant protection.
(“SYSTEM ARMED I” will appear for the GEM-P9600/3200 panels).
Emergency Buttons (Only available if programmed)
The Blue Emergency Buttons (7,8& 9), if programmed, are always active,
whether the system is armed or disarmed. The emergency signal will only be transmitted
when an Emergency Button and
G are pressed at the same time.
• Fire Emergency Simultaneously press 7 and G to alert the central station of a fire
emergency. *(Fire Emergency programmed? YES NO)
• Auxiliary Emergency Simultaneously press 8 and G to alert the central station of
an Auxiliary emergency. *(Auxiliary Emergency programmed? YES NO)
• Police Emergency Simultaneously press 9 and G to alert the central station of a
police emergency. *(Police Emergency programmed? YES NO)
INSTANT ON
AC ON
ARMED
To Next Page
Loading...
Need help?
General
