Need help?Do you have a question about the Gemini XGA-3000 and is the answer not in the manual?
General| Damping factor | 350 |
|---|---|
| Amplifier class | - |
| Frequency range | 10 - 50000 Hz |
| Input sensitivity | 770 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 3000 W |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Total Harmonic Distortion (THD) | 0.1 % |
| Dynamic power per channel (4 Ohm) | 200 W |
| Dynamic power per channel (8 Ohm) | 150 W |
| Bridge-mode power output per channel (8 Ohm) | 400 W |
| Purpose | Performance/stage |
| Fuse rating | AC 115v/230v 50~60Hz |
| Cooling type | Active |
| Product color | Black |
| Volume control | Rotary |
| Bridge function | Yes |
| Connectivity technology | Wired |
| Audio (L/R) in | 2 |
| Speakon ports quantity | 3 |
| Built-in display | No |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 482 mm |
| Height | 88 mm |
| Weight | 8600 g |
Ensure all accessories are included with your XGA Series amplifier before use.
Powers the unit on and off.
Adjusts the amplifier's volume for each channel.
Amplifier inputs for audio signals.
Controls operating mode (Mono Bridge or Stereo).
Separates ground signal or chassis ground to prevent conflicts.
Optional speaker output connections using 4-pole Speakon.
Connects to speaker input jacks; red is positive, black is negative.
Where the power cable is plugged in.
Details Gemini's one-year limited warranty on products.
Outlines the process for returning products for repair or warranty service.
To Next Page
