To Next PageTo Next Page
Need help?Do you have a question about the Gemini XL-500 and is the answer not in the manual?
General| Drive Type | Direct Drive |
|---|---|
| Tonearm Type | S-shaped |
| Pitch Control | +/- 10% |
| Platter | Aluminum Diecast |
| Signal to Noise Ratio | > 50 dB |
| Motor | DC Motor |
| Effective Tonearm Length | 230 mm |
| Overhang | 15 mm |
| Tracking Force Adjustment | 0-4 g |
| Output Voltage | 2.5 mV |
| Speed | 33 1/3, 45 RPM |
Lists key features of the turntable like pitch control and braking.
Advises users on safe operation and maintenance to prevent damage or shock.
Instructions for placing the platter and rubber mat on the turntable base.
Guidance on connecting lead wires and mounting the cartridge in the headshell.
Steps for inserting and locking the headshell into the tonearm.
How to slide and screw the counterweight onto the tonearm.
Procedure to balance the tonearm and set stylus pressure using the counterweight.
Setting the anti-skating control to match the stylus pressure.
Instructions for attaching the dustcover and recommendations for its use.
Advice on positioning the turntable on a stable surface away from heat and speakers.
Details on connecting the turntable to a receiver or mixer using RCA plugs and ground.
Step-by-step guide to playing a record, from placing it to stopping playback.
How to lift and lower the tonearm to pause and resume playback.
Specific steps for playing 45 RPM records, including using the adaptor.
Instructions on how to operate the target light to illuminate the stylus.
How to connect a gooseneck light to the XLR adaptor.
Explains how to use the pitch control for speed adjustment and the strobe indicators.
Technical specifications for the turntable, including drive, motor, platter, and speed.
Technical specifications for the tonearm, covering type, length, mass, and tracking.
General specifications such as power supply, consumption, dimensions, and weight.
