EasyManua.ls Logo

Gemini XL-120MKII User Manual

Gemini XL-120MKII
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATIONS MANUAL
BEDIENUNGSHANDBUCH
MANUAL DEL OPERADOR
MANUEL D’INSTRUCTIONS
BELT-DRIVE MANUAL TURNTABLE
MANUELLER PLATTENSPIELER MIT RIEMENANTRIEB
GIRADISCOS MANUAL ACCIONADO POR CORREA
TABLE TOURNANTE MANUELLE ENTRAÎNÉE PAR COURROIE
Question and Answer IconNeed help?

Do you have a question about the Gemini XL-120MKII and is the answer not in the manual?

Gemini XL-120MKII Specifications

General IconGeneral
Drive SystemDirect Drive
Platter MaterialAluminum
OutputRCA
Pitch Control+/- 10%
Wow and Flutter< 0.15% WRMS
Platter Diameter330 mm
Speed33 1/3, 45 RPM
MotorDC motor
Tonearm TypeS-shaped
Starting Torque1.0 kgf-cm
TypeManual Turntable

Summary

Important Warning and Safety Instructions

Water and Moisture

Prohibits using the product near water to prevent electrical hazards.

Assembly and Set-Up

Voltage Selection

Select correct voltage for the turntable to prevent damage.

Attaching the Turntable Belt

How to attach the drive belt to the platter and motor spindle.

Turntable Installation

Placing the turntable on a stable, level surface away from interference.

Cartridge Installation

Connecting lead wires to cartridge terminals and mounting.

Headshell Installation

Inserting and locking the headshell into the tonearm.

Counterweight Installation

Attaching and screwing the counterweight onto the tonearm.

Adjusting Horizontal Zero Balance and Stylus Pressure

Balancing the tonearm and setting stylus pressure.

Adjusting the Anti-Skating Control

Setting anti-skating to match stylus pressure for optimal tracking.

Connections

Connecting audio output cables to a mixer or receiver via RCA plugs.

Basic Operation

Steps for playing a record, from placing it to stopping playback.

Adjusting the Pitch Control

Adjusting the pitch +/- 6% using dedicated controls for speed variation.

Related product manuals