Gemini XL-500 II User Manual

XL-500 II
DIRECT-DRIVE MANUAL TURNTABLE
Handdrehscheibe mit Direktantrieb
Giradiscos manual de accionamiento directo
Table tournante manuelle à entraînement direct
Giradischi manuale a comando diretto
OPERATIONS MANUAL
Bedienungsanleltung
Manual de funcionamiento
Manual de fonctionnement
Manual del utente

Gemini XL-500 II Specifications

General

Drive Method	Direct Drive
Effective Arm Length	230 mm
Overhang	15 mm
Cartridge Type	Moving Magnet
Output	RCA
Motor	DC Motor
Speeds	33 1/3 RPM, 45 RPM
Platter	Aluminum Die-Cast
Tonearm Type	S-Shaped
Power Supply	AC 120V, 60Hz
Type	Manual Turntable

Summary

Introduction and Precautions

Assembly and Setup

Turntable Installation

Steps to place the turntable base, platter, and rubber mat on a level surface, ensuring proper placement away from vibrations.

Cartridge, Headshell, and Counterweight Setup

Instructions for installing the cartridge, headshell, counterweight, and adjusting balance and stylus pressure.

Anti-Skating Control Adjustment

Setting the anti-skating control to match the value of the stylus pressure for optimal tracking.

Operational Procedures

Dustcover and Connections

Mounting the dustcover and connecting the turntable's power and audio output cables to the appropriate jacks.

Basic Operation and Playback

Steps for starting playback, interrupting play, and playing 45 RPM records with the correct speed selection.

Target Light Usage

Activating the target light switch to illuminate the stylus tip for precise placement on the record.

Pitch and Speed Control

Using the pitch control for ±10% speed variation and understanding the pitch bend function.

Specifications