GemOro HORIZON LED User Manual

GemOro Products 4
Horizon LED 5
ASSEMBLY INSTRUCTIONS
1. Remove screw cap from lamp flex arm
by turning it counter clockwise.
2. Insert screw cap in the hole from the
bottom of the lamp base.
3. Insert threaded end of lamp arm into the top of the lamp
base so that the threads align with the screw cap.
4. While holding the screw cap steady, turn the lamp
arm clockwise while screwing it into the cap. A coin
may be used for leverage while screwing the cap in.

GemOro HORIZON LED Specifications

General

Brand	GemOro
Model	HORIZON LED
Category	Home Lighting
Language	English