Gemtek Systems BC-4GMCPGa - Easy Setup Guide; Step 1: Access Web Interface; Step 2: Login to Management Interface; Step 3: View Default Settings

6 pages

To Next Page

To Previous Page

Easy Setup

Please follow the steps below to configure your device through the web interface:

Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the

Dual-Band Modem : http://192.168.1.1

Step2: Enter Dual-Band Modem administrator login username/password to access the web

management interface. The default username/password is admin/admin.

Step3: The main page after login will display the default setting of SSID, Encryption, and

Password.

Step4: You could specify an SSID (Service Set ID) and Password then click Apply.