Genasun GV-10-Pb-12V - User Manual

GV-10-Pb-12V: 12V Lead-Acid/AGM/Gel/Sealed/Flooded
GV-10-Li-12.5V: 11.1V (3s) Lithium Cobalt/Polymer
GV-10-Li-14.2V: 12.8/13.2V (4s) Lithium Iron Phosphate
GV-10-Li-16.7V: 14.8V (4s) Lithium Cobalt/Polymer
GV-10 Manual
For models:
Solar Charge Controllers with Maximum Power Point Tracking
IMPORTANT SAFETY INSTRUCTIONS | SAVE THESE INSTRUCTIONS
GENASUN GV-10(ALL MODELS) MANUAL, REVISION 1.0 | 10.2012
10.5A / 140W
http://genasun.com
GENASUN INC.



Summary

Safety Instructions

Lithium BMS Warnings

Genasun recommends a BMS for lithium batteries to manage temperature, current, and voltage ranges for safety.

Inspection and Maintenance

Annual inspection of connections, damage, and security is recommended for proper performance.

Installation & System Connections

Selecting Battery Type (Pb Model)

Guides selection of charging profile for lead-acid batteries, including jumper settings for flooded types.

Mounting the Controller

Instructions on secure mounting near the battery, considering environmental factors and airflow.

Connecting the Solar Panel

Details on connecting the solar panel, recommending panel-first connection to prevent damage.

Connecting the Battery

Instructions for connecting the battery, noting that loads should connect directly to the battery.

Status Indication

LED Run;Charge Indication

Describes LED patterns for standby, charging (various current levels), and battery charged states.

LED Error Indication

Explains LED error codes for overheat, overload, low/high battery voltage, and internal errors.

Troubleshooting

Common Fuse Causes

Lists common reasons for blown fuses, including incorrect battery connection and short circuits.

Specifications

Genasun GV-10-Pb-12V Specifications