Genelec 9320 - Page 49

9320 Reference Controller Operating Manual 49 (52)
Table 9. Typical input performance
Parameter Unit
Analogue
line input
USB input AES/EBU input
Connector mm (in) 6.3 (1/4) TRS USB-C XLR female
Interface type, electrical Balanced USB 2.0
High Speed
AES 3
Maximum input voltage (Lo Gain) dBu 24 n.a. n.a.
Maximum input voltage (Hi Gain) dBu 12 n.a. n.a.
Input impedance, differential Ω (ohm) 6600 n.a. 110
Frequency response, -3 dB kHz 0.2 Hz - 46 0 – 46 0 – 46
Samplerates kHz n.a. 44.1
48
88.2
96
176.4
192
32 – 192
Sample word legth bit n.a. 24 16 – 24
Frequency response flatness
20 Hz - 40 kHz
dB ± 0.05 ± 0.01 ± 0.01
Channel gain difference dB < 0.05 < 0.01 < 0.01
Dynamic range (A weighted) 20-20kHz
Lo Gain
Hi Gain
dB
123
121
138 (24 bit) 138 (24 bit)
Equivalent input noise (A weighted) 20-20kHz
Lo Gain
Hi Gain
µV
9
3
n.a. n.a.
THD+N distortion and noise (Hi Gain), input
signal -6 to 0 dBFS 1 kHz, measurement
range 20 Hz - 20 kHz
% 0.0005 n.a. n.a.
dB –106 n.a. n.a.
Distortion and noise (Low Gain),
input signal -6 to 0 dBFS 1 kHz, measurement
range 20 Hz - 20 kHz
% 0.0004 n.a. n.a.
dB –108 n.a. n.a.