To Next PageTo Next PageHow to resolve Generac Power Systems gp 8000e Portable Generator engine 'hunting' or faltering?
If your Generac Power Systems Portable Generator engine “hunts” or falters, move the choke to the halfway position until the engine runs smoothly.
General| Model | GP8000E |
|---|---|
| Type | Portable Generator |
| Engine Type | OHV |
| Engine Displacement | 420cc |
| Fuel Type | Gasoline |
| Run Time at 50% Load | 11 hours |
| Voltage | 120/240V |
| Starting Method | Electric Start |
| Frequency | 60 Hz |
| Wheel Kit | Included |
| Weight | 200 lbs |
| Running Wattage | 8000 W |
| Fuel Tank Capacity | 7.5 gallons |
| Dimensions (L x W x H) | 27.2 x 27 x 26 in |
| Starting Wattage | 10000 watts |
| Outlets | (2) 5-20R 120V GFCI Outlets, (1) L5-30R 120V Twist Lock Outlet, (1) L14-30R 120/240V Twist Lock Outlet |
Emphasizes the importance of reading and understanding the manual for safe operation.
Explains DANGER, WARNING, CAUTION, and NOTE symbols used throughout the manual.
Details common risks like enclosed operation, moving parts, and hot surfaces.
Warns about deadly exhaust fumes (carbon monoxide) and the need for outdoor operation.
Details dangers of high voltage, wet conditions, and proper grounding procedures.
Covers dangers associated with gasoline, flammability, and explosion risks.
Lists relevant safety standards and codes for generator installation and use.
Instructions for unpacking, checking contents, and identifying included accessories.
Guides users through the assembly process, including attaching wheels, handles, and frame feet.
Details how to connect battery cables for electric start models.
Identifies key controls and components of the generator for familiarization.
Describes the 120V AC duplex and 120/240V AC locking receptacles.
Explains the hourmeter's function for maintenance reminders like oil changes.
Specifies usage and cord requirements for the 120V AC duplex and 120/240V AC receptacles.
Directs users to start/stop procedures and connection/disconnection guidance.
Explains the generator's equipment ground and portability without frame grounding.
Advises on connecting to a building's system via a transfer switch and qualified electrician.
Explains the dangers of overloading and how to calculate wattage requirements.
Provides a guide to wattage requirements for various devices.
Outlines essential pre-start checks, including adding oil and gasoline.
Step-by-step guide for starting engines using the recoil starter.
Instructions for starting engines using the electric start system.
Provides steps for safely shutting down the generator engine.
Explains the automatic engine shutdown feature due to low oil level.
Details how to charge the battery for electric start models.
Stresses the importance of scheduled maintenance for proper operation and warranty.
Outlines intervals for various maintenance tasks like oil changes and filter checks.
Lists detailed specifications for the generator and engine.
Advises on proper maintenance practices to preserve warranty and performance.
Covers general cleaning and upkeep of the generator unit.
Gives instructions and precautions for checking and changing the engine oil.
Step-by-step guide for replacing the spark plug for better engine performance.
Provides notes on battery care and replacement procedures.
Details the importance and procedure for cleaning or replacing the air filter.
Explains how to check and adjust valve clearance for engine longevity.
Provides detailed steps for preparing the generator for long-term storage to prevent fuel system issues.
Offers additional advice on fuel storage, covering, and location for stored units.
A table listing common problems, their causes, and suggested corrections.
