GENERAL ECOLOGY SEAGULL IV X-1 - User Manual

200679B
General Ecology, Inc.
Read instructions completely before starting installation.
Before starting, check to make sure you have received all of the parts for your system shown on the following
page within the shaded area. Con guration dimensions are shown on page 3. Follow steps 1 through 6 on
page 4 for system instructions. Additional instructions on changing the puri cation cartridge can be found on
page 8, steps A through F.
General Ecology, Inc.’s X-2 and X-1 drinking water puri cation systems are designed to operate 25 to 125 psi.
For cold water use only.
INSTALLATION AND PRODUCT USE GUIDE
DRINKING WATER PURIFICATION SYSTEM
SEAGULL
®
IV X
-
2
DRINKING WATER PURIFICATION SYSTEM
SEAGULL
®
IV X
-
1

Summary

Installation and Product Use Guide

Seagull IV Drinking Water Purifier Parts Diagram

Seagull IV Drinking Water Purifier Dimensions

Seagull IV Drinking Water Purifier System Installation Instructions

Install Purification Cartridge

Installing the supplied purification cartridge into your new system.

Connect to your existing Cold Water Supply

Connecting the purifier to the cold water supply line based on faucet configuration.

Installation and Connecting X-1;X-2 with Contemporary Faucet

Connecting to Existing Faucet Configuration

Connecting the purifier to a non-General Ecology supplied faucet.

Hose Connections to Vessel

Mounting Bracket Installation

Operation

Faucet Care Instructions

Mounting Hole Pattern

Cartridge Replacement Instructions

Helpful Hints

Tips for separating pressure vessel halves and cartridge installation.

WARRANTY

Information regarding the product warranty, registration, and contact details.

GENERAL ECOLOGY SEAGULL IV X-1 Specifications