R
Richard CollinsAug 4, 2025
What to do if there is no flow through the return hose of my General Foam Plastics Swimming Pool Filter?
- AAndrew RogersAug 4, 2025
If you're experiencing no flow or low flow through the return hose of your General Foam Plastics Swimming Pool Filter, consider the following: 1. **Water Level:** Ensure the water depth is no more than 2 inches from the bottom of the inflatable ring or covers the intake by at least 4 inches. 2. **Obstructions:** Check for any obstructions at the intake fitting and in the return hose. 3. **Filter Condition:** A dirty filter can restrict flow. Clean or replace the cartridge. Keeping spare cartridges on hand can be helpful. 4. **Rotor:** Inspect the rotor.