ITEM
NO.
PART
NO.
DESCRIPTION QTY.
1 2103102 PAWL ASSY., RIGHT 1
2 2103103 PAWL ASSY., LEFT 1
3 2530094 CONNECTOR, MALE, 1/4” 1
4 2530095 PLUG, 1/4 1
5 2520109 MANIFOLD 1
6 2203412 FLAT WASHER, M12 1
7 D10002 COUPLER, 1/4 QC 3
8 2700014 WHEEL, 7" 2
9 2200008 WASHER, FLAT, M10 2
10 2200033 NUT, M10 2
11 2400009 LABEL, WARNING (NOT SHOWN) 1
12 965013Q NOZZLE, 65 X 1.35 3
13 2103101 FRAME ASSY. 1
14 2400006 LABEL, WATER BROOM 1
15 2800004 UNCLOGGER, NOZZLE 1
PARTS LIST
Revision F
052016
TRIKLEENER
® NOZZLE SIZING CHART
Step 1: Find your pressure washer PSI rating on the table above.
Step 2: Find your GPM in the column of your PSI.
Step 3: Find color and this will show what nozzles you should use.
Pale Gray ......................Will work with nozzles included and/or with one nozzle plugged
Light Gray......................Will work with nozzles included (3 x 1.35)
Medium Gray.................Should purchase three 1/4” quick connect nozzles size #2.0 with
a 40 degree angle
Dark Gray ......................Should purchase three 1/4” quick connect nozzles size #2.5 with
a 40 degree angle
Nozzles can be purchased at most Pressure Wash dealers or aftermarket dealers
FOR MORE INFORMATION, OR TO VIEW AN INSTRUCTIONAL VIDEO,
VISIT www.trikleener.com
To Next Page
Loading...