General 15-250 M1

UNPACKING
Carefully unpack and remove the unit and its components from its shipping container and check for missing or
damaged items as per the list of contents below.
NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.
LIST OF CONTENTS
Once the parts have been removed from the packa-
ing, you should have the following items:
QTY
24” HORIZONTAL DOUBLE DRUM SANDER . . . . . . . . .1
HARDWARE BAG (from left to right)
— HANDLE KNOB . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
— CRANK HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . .1
— 5 MM ALLEN KEY . . . . . . . . . . . . . . . . . . . . . . . . . .1
— 6 MM T-HANDLE ALLEN WRENCH . . . . . . . . . . . . .1
— 2 MM T-HANDLE ALLEN WRENCH . . . . . . . . . . . . .1
— 12-14 MM COMBINATION WRENCH . . . . . . . . . .1
ADDITIONAL REQUIREMENTS FOR SET UP
• Extra person for help with lifting
• Phillips Screwdriver
• 10 mm open end wrench
• Utility knife
• Flat piece of wood or any similar non-cutting
object
6