Need help?Do you have a question about the General UV513AB and is the answer not in the manual?
General| Brand | General |
|---|---|
| Model | UV513AB |
| Category | Measuring Instruments |
| Language | English |
Store the UV sensor in a dry environment when not in use.
Improper use can endanger third parties and cause damage to equipment or materials.
Explanation of key safety symbols including CE conformity.
Proper disposal of the device according to regulations for reuse and recycling.
Explains the function of the Memory, Mode, Power/Hold, and Select buttons.
Details the segments, readings, and indicators on the LCD screen.
Procedure for turning the UV-Meter on using the Power On/Off button.
Procedure for turning the UV-Meter off using the Power On/Off button.
Explains the primary and secondary readings displayed by the meter.
How to navigate through main functions like MIN/MAX/AVG using the Mode button.
Details the four measurement modes: None, Max, Min, and Avg.
How to freeze the displayed value and the HOLD symbol.
How to access stored data points (0-20) using the M and S buttons.
Storing the current measurement manually using the M button.
Enabling and understanding automatic data recording up to 20 points.
Procedure for zeroing the sensor and clearing adjustment values.
Clearing stored data points 0 to 20 in Zero Mode.
How to change the measurement unit between μW/cm² and mW/cm².
Setting auto-record interval times (9 options).
Instructions for cleaning the device housing with soap and water.
Notification when the battery level is low.
The calibration point for the UVAB sensor is 365 nm.
The operating temperature range for the sensor is 0° to 50°C.
The accuracy specification for the sensor is ±4% ±1 digit.
Specifies low and high illumination ranges for the sensor.
Attention regarding short-term measurement and housing temperature limits.
Identifies the parts of the extendable wand: upper case, sensor, lower case.
Recommendation to avoid frequent assembly/disassembly to prevent wear.
To Next Page
