Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
24
UNMS Server
The UNMS server was specially developed to communicate with the universal network management software from GENEREX.
The powerful successor UNMS 2 communicates via UPSTCP on port 5769. The UPS server service enables or disables
availability through this port.
When using an UNMS / UNMS2 – Software product, this function should be left enabled.
Date and Time
For this configuration step, navigate to the following menu:
Surprisingly some system critical duties like logging or running recurring tasks require a reliable Realtime-clock.
For this reason, the CS141 provides an own system clock but also offers the ability to query external NTP servers. For
maximizing failure security, the CS141 can even set und read the internal clock of the UPS if supported.
Automatic clock correction
Surprisingly some system critical duties like logging or running recurring tasks require a reliable Realtime-clock.
For this reason, the CS141 provides an own system clock but also offers the ability to query external NTP servers. For
maximizing failure security, the CS141 can even set und read the internal clock of the UPS if supported.
Automatic time adjustment
If the network settings are set correctly and CS141 gets an internet connection, you can use the default server settings. In case
of a local time server inside a closed-up network segment, the CS141 provides to use an IP address instead of name services. If
internal time services used, we recommend the option to enter an IP address although a DNS-Service is available:
If DNS lookup fails, the NTP synchronization will not run.
Note:
A time server normally provides preformatted time containing information about used time zones. The CS141 calculates the real
system time itself from the time zone setting.
If you operate your own time server, this time zone must be adjusted accordingly.
Pressing Apply will save the settings and restarts the time server service inside the CS141 without rebooting.
As soon as the time service accepted the new settings, the first-time synchronization follows.
To Next Page
Loading...
Need help?
General
