Generex CS141 Series - User Manual

Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
1
CS141 User Manual English
SITEMANAGER 6
SITEMONITOR 6

Generex CS141 Series Specifications

General

Brand	Generex
Model	CS141 Series
Category	Controller
Language	English

Summary

Welcome

Configuration: SITEMONITOR 6; SITEMANAGER 6

Covers configuration for SITEMONITOR 6 and SITEMANAGER 6.

Setup: Mail, SNMP and Modbus

Details setup for email, SNMP, and Modbus communication.

Scope of functions

SNMP und SNMP Traps

Explains SNMP and SNMP Traps functionality.

Multiple Server Shutdown via RCCMD

How to perform multiple server shutdowns using RCCMD.

Network integration of the CS141

Sliding switch to centre position

Describes configuration mode using the center slide switch position.

Sliding switch to the right

Explains DHCP mode using the right slide switch position.

Sliding switch to he left

Describes manual IP configuration using the left slide switch position.

First configuration 10.10.10.10

Preparation: SITEMANAGER; SITEMONITOR

Preparation steps for SITEMANAGER/SITEMONITOR before configuration.

Preparing the Workstation

Steps to prepare the workstation for CS141 configuration.

The DHCP mode

Useful information for the DHCP mode

Important notes and tips for using DHCP mode.

Netfinder: Finding your IP address

Operation mode of the web manager

The configuration mode

Details the default configuration mode.

Der regular operation mode

Describes the regular operation mode.

Der manual mode

Configures IP address manually.

Der DHCP Modus

Uses DHCP for automatic IP assignment.

The rescue mode

Details the rescue mode for system recovery.

Port list

Required Ports

Details the necessary ports that must be open.

Basic settings

Covers basic settings and user access.

Der Setup Wizard

General

General configuration settings within the wizard.

Network

Network configuration settings within the wizard.

Date & Time

Date and time settings within the wizard.

UPS Setup

UPS setup configuration within the wizard.

Configuration mode: Basic settings

Date and Time

Automatic clock correction

How automatic clock correction works.

Automatic time adjustment

Settings for automatic time adjustment.

How to set up a custom time server

User management

System and Setup Overview

System overview

Displays an overview of the system's current status.

Network settings

Switch to operating mode

System notifications

Setting up email services

Configuration for email services and notifications.

How to configure Modbus

SNMP Agent

Configurating SNMP V2

Set up trap receivers v2

Configuring trap receivers for SNMP v2.

Configurating SNMP v3

UPS Setup

Premium feature: The RFC1628 UPS interface

Setting up the target SNMP card with SNMP v2 at CS141

Steps to set up a target SNMP card with SNMP v2.

Setting up the destination card using SNMP v3 at CS141

UPS-Monitor: Checking UPS Settings

Event handling

Defining jobs for an event

Event handling: Defining a job

UPS Shutdown definition

Configuring UPS Shutdown

Configuring a Job

Custom Thresholds

Differences between Warning and Alarm Levels

Explains differences between warning and alarm levels.

Tutorial: Custom Thresholds

RCCMD

Available RCCMD commands fort he CS141

Lists available RCCMD commands for CS141.

Configure an RCCMD-Job

Set up IP address for RCCMD

Configuring IP addresses for RCCMD communication.

Limiting IP addressing

Configuration of a job for alarm behaviour

SITEMANAGER 6 Configuration

Sensors

Connecting a sensor

Definition of the alarm thresholds

Pre-Alarm and Alarm

SITEMANAGER 6 - Job definition

Digital Inputs - Assign a Job to an Event

Scheduler

Webserver

Enable HTTP Server

Tutorial: How to create a server.pem-file

Create certificate and key

CS141: Inserting the server.pem file

Diagnostic: Status LEDs

Logfiles

Event log

Data Log

Data log Chart

Tools

Reboot

Tracer

Using the tracer tool for communication diagnostics.

Network-Scan

Delete log files

Complete removal of all user traces

Data backup;Data restore and system updates

Step 1: Perform a backup

Steps for performing a system backup.

Step 2: Restoring data

Steps for restoring system data from a backup.

Firmware updates

Changing OEM Firmware

Most common problems while configuration and updating

Dip-switches; slide switch in wrong position

Forgotten Reboot

Web Browser caching caused issues

If nothing works…

Starting the rescue system

Activating the rescue system for recovery.

Konfiguration der SITEMANAGER II;v6 Analogeingänge