Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
95
The Tracer logs packet data within the LAN segment in real-time and stores it locally on the CS141. The tracer will quit if there
are two conditions:
1. A reboot (expected / unexpected)
2. By pressing the Stop button
After finishing, the data will be downloaded in the form of a packed archive for later evaluation.
3.
4.
Note:
The network tracer is usually very rarely needed. In seldom cases GENEREX technical support needs specific
additional information to locate a problem.
In this case, it is recommended to start the tracer without using filtering options. Furthermore, it turns your CS141 into
a powerful network diagnostic tool that lets you examine your local LAN:
Refer www.tcpdump.org to find extensive tutorials how to define filters in order to use the full potential of the CS141
as a network diagnostic system.
Data evaluation
The data analysed via diagnostic tools such as Wireshark *:
Downloaded data can be read and analysed by special diagnostic tools such as Wireshark *:
*Wireshark is not a GENEREX product. It is available at www.wireshark.org
Delete log files
The CS141 collects and logs many data and uses non-volatile memory to store
it permanently:
These data can then be retrieved via a web browser or evaluated by diagnostic
tools. Since the log files may contain very sensitive information about a network
state, it is recommend to delete all data before re-using the CS141
Webmanager.
Network log
Deletes any network trace data
Event log
Deletes all logged data according to events
Data log
Deletes additional data of UPS measurements.
To Next Page
Loading...
Need help?
General
