Generex CS141 Series User Manual

Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
88
Diagnostic: Status LED's
The CS141 offers several options for diagnosis. The fastest method is a quick visual inspection of the LEDs
To perform a quick inspection, just take a look at the two LEDs next to the COM 1 interface:
Green LED
Red LED
Adapter
OFF
OFF
No Power
OFF
AN
Boot in progress
OFF
SLOW BLINKING
Update in progress
AUS
FAST BLINKING
Update failure
ON
ON
Communication lost: UPS or external device
SLOW BLINKING
OFF
Everything is OK with the world
After logging in, the CS141 will display a more detailed overview of the current system state:
A green marker indicates communication without problems.
Please note the setting no UPS device selected will show a dummy screen and the LED will also be green.
A yellow marker is displayed if:
- - The device will initialize and the communication is being established
- - there is a warning behaviour. It might be required appropriate intervention in the near future.
If the LED is red, an alarm or critical condition is currently detected:
- The CS141 has lost communication with a connected device
- There is a system critical condition, which requires a timely intervention.
The type of the alarm is displayed in detail.
A blue marker indicates that the device was probably configured correctly, but no initial communication has been established.
A grey marker and the description disabled means that a device has been completely deactivated and cannot provide any data.

Generex CS141 Series Specifications

General

Brand	Generex
Model	CS141 Series
Category	Controller
Language	English