Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
6
Welcome
We thank you for your confidence in the extensive product family of the CS141 Webmanager - the reliable solution in critical
resource management.
The CS141 was developed specifically for use in critical resource management. As the CS141 was developed as a fully-fledged
and independent manager, its task is not limited to collecting and passing on information, but fulfils numerous tasks in
measurement, regulation and control technology in the field of critical resource management. Another core function is message
management:
The CS141 can not only answer queries from higher-level systems, but also independently inform responsible personnel in an
emergency and initiate emergency measures as far as configured by an administrator. The CS141 can independently activate
emergency systems, shut down servers and workstations and restart them under predefined conditions. In addition to standard
technologies such as BACnet, SNMP and Modbus, the CS141 makes exclusive use of the powerful RCCMD software solution,
with which even the emergency behaviour of complex, fully virtualized server landscapes can be realized.
It is no coincidence that the CS141 is the heart of the new SITEMANAGER 6 and SITEMONITOR 6.
Even more flexibility thanks to RFC1628
Thanks to the new RFC1628-compliant UPS interface, you can use the CS141 to query any UPS that supports this standard via
the existing LAN and display the current status natively. So, if you have a UPS in use whose interfaces are, contrary to
expectations, not compatible with the CS141, you can use this function to establish compatibility with little effort and cost and
thus fall back on the powerful and reliable GENEREX products such as the RCCMD developed by GENEREX.
Note:
As the CS141 Webmanager can act as a stand-alone manager, it can be used flexibly with nearly any task, even outside the
functionality described in this manual. This manual therefore describes the basic implemented functionality in connection with
UPS systems. The enormous flexibility and the possibility to communicate with higher and lower-level systems in real time.
As individual as your network
SITEMANAGER and SITEMONITOR flexibly adapt to your specific network requirements. This manual describes all the menus
you may encounter when configuring the following devices:
- SITEMANAGER 6
- SITEMONITOR 6
Please note that - although there are many overlaps - for technical reasons not all accessories are fully cross-compatible, even
if the external connector configuration would fit.
This includes for example:
- Additional sensors and devices
This includes, as an example, the GSM modem, analogue sensors as well as the SENSORMANAEGR II or the Relay board
CON_R_AUX / 4 or the BACS version GX_R_AUX.
- AUX devices and BACS upgradeability
In addition to switchable outputs, the SITEMANAGER offers analogue and digital inputs, optionally via the terminal strip or the
analogue sensor inputs, as well as the complete BACS functionality
The SITEMONITOR offers two AUX ports, via which specially developed relay boards can be addressed, and 64 inputs, which
can be configured exclusively via the terminal strip.
In both units, the powerful CS141 is used as the heart:
Unlike the CS141, COM port 1 here is the interface to the UPS and cannot be used for sensors. The menus here differ from the
CS141 standard interface, and some functionalities are different. If your unit does not offer a hardware layout, you will not be
offered the corresponding menus within the software.
To Next Page
Loading...
Need help?
General
