4.1 Installation Guidelines
● Avoid installations in locations containing mineral oil.
● Avoid installation in locations where the air contains salt or other corrosive gases.
● Avoid installation in locations with serious power supply voltage fluctuation.
● Avoid installation in unstable places, such as a car or cabin.
● Avoid installation near flammable items.
● Avoid installation in locations with strong electromagnetic forces.
● Avoid installation in locations with harsh environmental conditions.
4.2 Installation check
● Check the model, number, name etc, to avoid incorrect installation.
● Make sure there is enough space for installation and maintenance.
● Install in a dry well-ventilated place and make sure there are no obstructions around the air inlet
and outlet.
● Make sure the supporting base is strong enough and prepared to that shocks can be avoided.
● The power supply and diameter of the cables used must be in accordance with the electrical
installation requirements.
● Electrical installation must comply with the relevant technical standards of electrical equipment, and
electrical insulation work must be done.
● The unit must be put horizontally for at least eight hours before running.
4. Installation of the unit
To Next Page
Loading...