2-27
0022
Folding the center head restraint
(if equipped)
To fold the center head restraint :
• When the rear-center head
restraint is not used, manually fold
back the rear-center head restraint
while pressing the button (1) on the
side. To use the rear-center head
restraint again, manually pull up
the rear-center head restraint, until
it is securely latched.
• You can remove the rear-center
head restraint by manually pulling
up the rear-center head restraint,
while pressing the release button
(2).
• You can adjust the rear-center
head restraint to the further lower
height by pressing the button (2),
which is located under the rear-
center head restraint, with the arm-
rest folded back.
Information
If the center head restraint is in the
lowest position, raise the head
restraint before folding back the arm-
rest.
i
OHI038130
When the center head restraint
is not in use, fold the head
restraint back to prevent it from
interfering with your vision
through the rear window.
CAUTION
To Next Page
Loading...
