2-30
Safety system of your vehicle
Seat coolers (if equipped)
The seat coolers are provided to
cool the seats by blowing air through
small vent holes on the surface of the
seat cushions and seatbacks.
When the operation of the seat cool-
er is not needed, keep the switches
in the OFF position.
While the engine is running, push the
switch to cool the seat.
• Each time you push the switch, the
air flow changes as follows:
• If the seat cooler for the rear seat is
positioned at HIGH, the airflow
speed will increase according to
vehicle speed (e.g. If vehicle speed
is high, airflow speed will increase.)
OHI038131
■ Front
OHI039033N
■ Rear
OFF→HIGH( )→MIDDLE( )→LOW( )
→
To Next Page
Loading...
